The Ultimate Guide to Making Your Wacom Tablet Work on Windows 7
Sunday, August 14, 2011 at 4:17PM
saveenr

PLEASE READ: The Windows and Wacom Tablet Nightmare is Over

 

[Update on 2012/08/18] for Windows 8 information go here: http://viziblr.com/news/2012/8/18/windows-8-rtm-and-wacom-tablets-better-but-flawed.html

When Windows 7 sees that your DESKTOP PC has a Wacom tablet attached, it activates a bunch of Tablet PC – based features that annoy most users. This post will explain what these problems are and how to disable them.

NOTE: I’ve covered these topics before, but separately and went into a lot of technical detail – this post is the comprehensive guide that just tells you what you need to know.

YOU HAVE TWO OPTIONS. PICK ONE.

The AUTOMATIC option: use the Fix My Pen! tool.

The MANUAL option: follow the steps below in the order given.

 

MANUALLY CONFIGURING YOUR SETTINGS

 

 

PREFER TO WATCH THE SCREENCAST?

In case you prefer watching me do the steps, you can see this screencast.

 

STEP 1: DOWNLOAD AND INSTALL THE LATEST DRIVERS

Don’t argue with me on this. Just do it.

You can get the drivers here:

http://us.wacom.com/en/support/drivers

 

NOTE: When the drivers are first installed is when Windows 7 starts to enable all the unwanted Tablet PC features.

STEP 2: DISABLE THE TABLET PC INPUT PANEL

The first annoying Tablet PC feature is the Tablet PC Input Panel

You’ll typically see it as a little bar on the side of your desktop.

image

And when your cursor gets close it starts to flaunt itself…

image

Clicking it will reveal its full monstrosity ….

image

And there’s more. You’ll often also see a small input panel icon hovering hear any text input boxes

image

 

We want to disable this entirely.

Go to Control Panel > Tablet PC Settings

image

Click on the Other tab

image

 

On the Other tab, under Tablet PC Input Panel options, click on Go to Input Panel Settings

 

image

 

Disable all the checkboxes and select OK.

image

 

STEP 3: DISABLE FLICKS

The Flicks icon shows up on the notification area.

image

If you click on the Icon you’ll see some for of the Flick UI

image

The effect of flicks is that normal gesturing with the pen causes Windows to think you are giving it a command. For example, drawing a short down stroke will cause the following flick notifcation

image

Of course, we hate this and want to disable it.

Open the Pen and Touch control panel

image

Click on the Flicks tab

image

 

Uncheck the two checkboxes and press OK

image

 

 

STEP 4: DISABLE PRESS-AND-HOLD

Another hated feature. It’s a bit hard to describe in words, so here is an animation of its effect. All I am doing is pressing the pen down and then you’ll see the hated “glowing ring” followed by a property menu when I lift the pen (Press-and-hold things that pressing is an equivalent of a “right click”)

press-and-hold

In Control Panel go to Pen and Touch

image

Under Pen Options, select Press and Hold and click Settings

image

Uncheck Enable press and hold for right-clicking and press OK

image

 

STEP 5: DISABLE DYNAMIC FEEDBACK

This is all the little rings that display whenever you press down with the pen

pen-dynamic-feedback

The is the hardest one to disable because there’s no place in the control panel that lets you disable it.

You are just going to have modify the registry and take care of it that way.I have provided a REG file that will help you do this

Download the ZIP here: http://goo.gl/kgZHv

The file is called disable-pen-feedback-regedit.zip

Extract the contents of the file

image

Inside are two REG files. One to disable dynamic feedback (this is the one you want) and other file to re-enable it (some people wanted this so I made it for them)

Right-click on disable-pen –feedback.reg and select Merge

image

Windows will warn you, but just click Run

image

And Windows will warn you again, just press Yes.

image

And finally it will tell you that it has merged the settings

image

 

In case, you are wondering here are the contents of the file.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\TabletPC]
"TurnOffPenFeedback"=dword:00000001

[HKEY_CURRENT_USER\Software\Policies\Microsoft\TabletPC]
"TurnOffPenFeedback"=dword:00000001

 

ONE LAST STEP

Sometimes all these changes will take place immediately, sometimes it takes a little longer. Usually the easiest way to force the changes is to simply log-off and then log back on. If that doesn’t work just try restarting your machine. (Those who are more technical may choose to simply restart the “Tablet PC Input Service”)

Article originally appeared on viziblr (http://viziblr.com/).
See website for complete article licensing information.